Pioneer 915, VSX-815

The System Setup menu07

Adjust the level of each speaker as the test

tone is emitted.

5 When you’re finished, press RETURN.

Tip

• You can change the channel levels at any

time by using

EFFECT/CH SEL

and

+/–

the remote control. You can set two

channel levels: one for

DVD 5.1 CH

and

one for the listening modes.

Speaker Distance

For good sound depth and separation from

your system, you need to specify the distance

of your speakers from the listening position.

The receiver can then add the proper delay

needed for effective surround sound.

1 Select ‘SP DISTN.’ from the SP SETUP

menu.

2 Use

/

(cursor left/right) to choose the

speaker that you want then set the distance.

Use

/

(cursor up/down) to adjust the

distance of each speaker (in 0.5 feet

increments).

3 When you’re finished, press RETURN.

Note

1• If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level

of each speaker to 75 dB SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

VSX_815-915.book.fm 50 ページ２００４年１２月８日　水曜日　午後４時３分