Pioneer A9 Saving channel presets

Other connections06
20
En
•Use the / buttons to select a channel
then press
ENTER to listen to the XM radio
broadcast.
• To browse by genre, first press
CATEGORY, use / to select a genre
then press ENTER.1
• To cancel and exit any time, press
RETURN.
Tip
• You can select channels directly by
pressing D.ACCESS then the three-digit
channel number.
•You can press DISPLAY to change XM
Radio information in the front panel
display.
Saving channel presets
This receiver can memorize up to 30 channels,
stored in three banks, or classes, (A, B and C)
of 10 stations each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre
above.
2Press T.EDIT .
The display shows a blinking memory class.
3 Press CLASS to select one of the three
classes then press
/ to select the channel
preset you want.
You can also use the number buttons to select
a preset.
• The default for all presets is CH001.
4Press ENTER .
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the XM channel.
Listening to channel presets
You will need to have some presets stored to do
this.
1 Press CLASS to select the class in which
the channel is stored.
Press repeatedly to cycle through classes A, B
and C.
2 Press / to select the channel preset
you want.
• You can also use the number buttons on
the remote control to recall the channel
preset.
Connect & Play™, XM-Ready® and The Ultimate
Playlist are trademarks of XM Satellite Radio Inc.
©2005 XM Satellite Radio Inc. All rights reserved.
All other trademarks are the property of their
respective owners.
Note
1 Select CH000 (RADIO ID) from the front panel display to check the Radio ID of the Connect-and-Play antenna.
A9_KU.book 20 ページ ２００６年１１月６日 月曜日 午後３時３４分