Connecting the Power Cable

Hide-away Unit

Power cable

RCA video output (yellow) (Refer to page 31.)

Fuse resistor

Lightgreen/orange (Refer to page 32.)

Black (ground)

To vehicle (metal) body.

Fuse resistor

Red

To the electric terminal controlled by the ignition switch (12 V DC) ON/OFF.

Do not connect this lead to power source terminals to which power is continuously supplied. If the lead is connected to such terminals, the battery may be drained.

Fuse holder (4 A)

Yellow

To the terminal always supplied with power regard- less of ignition switch position.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

Parking brake switch

Power supply side

Ground side

Note:

The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.

Connecting method

Clamp the parking

Clamp firmly

brake switch power

with needle-nosed

supply side lead.

pliers.

ITALIANO NEDERLANDS

28

Page 29
Image 29
Pioneer AVD-W6000 owner manual Connecting the Power Cable, English Español Deutsch Français