Pioneer AVD-W6210 owner manual Picture Adjust, Switching the image of rear display

[PICTURE ADJUST]

Press 5 or ∞ to select [SET UP], and press the MENU-ENTER button. [PICTURE ADJUST] menu is displayed. (Refer to page 14.)

[PICTURE MODE]

You can select either [STD IMG] or [MIR IMG] for the back-up camera image. [STD IMG]: You can see the back-up camera image as a non-reverse image. [MIR IMG]: You can see the back-up camera image like a rear-view mirror image.

Note:

• The initial setting for [PICTURE MODE] is [STD IMG].

Switching the image of rear display

When rear display is combined, you can select either showing navigation images on rear display or the images of each source.

1.Press 5 or ∞ to select [VIDEO SETTING] from the setup menu, and press the MENU-ENTER button.

2.Change the rear source setting with 2/3.

Pressing 2/3 will switch between [NAVI] and [SOURCE].

V I DEO SE T T I NG

AV I N2	BACK - UP			CAM
REAR SOURCE			SOURCE
POLAR I T Y		BAT TERY
P I CTURE	AD J UST
			SET	UP
P I CTURE MODE		ST D		I MG
RETURN

[NAVI] : Navigation images are output from rear display output on the hide-away unit when navigation images are displayed on Front display.

[SOURCE] : Images of the selected source are output.

Note:

•Images of the map screen of the navigation slightly differ from a standard NTSC style. If map screen of the navigation is output from rear display output on the hide-away unit, the images may not be displayed properly according to a display.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

18