Pioneer AVIC-N1 Turning the unit on and select- ing a source, Loading a disc, For DVD-video,CD

Turning the unit on and select- ing a source

•If the program is not installed, see “Opera- tion Manual” and install the program.

1 Turn the ignition switch (ACC) ON.

The product’s power supply comes on.

2 Press SRC button to select a source.

Press SRC button repeatedly to switch between the following sources:

XM (XM tuner) — RADIO (tuner) — TV (tele- vision) — AV (video input) — DISC [CD, MP3, CD/MP3](built-in DVD drive) — S-DVD(DVD player/multi-DVD player) — M-CD(multi-CD player) — EXT-1(external unit 1) — EXT-2(external unit 2) — AUX (Auxiliary equipment)

❒ Press and hold to turn the source off.

❒In the following cases, the sound source will not change to them:

—When a unit corresponding to each source is not connected to this unit.

—When no disc (DVD-video, CD) is set in this unit.

—When no disc is set in the DVD-player (S- DVD).

—When no magazine is set in the multi-CD player.

—When no magazine is set in the multi-DVD player.

—When the AUX (auxiliary input) is set to off (refer to Operation Manual).

—When the AV (video input) is not set to VIDEO (refer to Operation Manual).

❒External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter- nal units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.

❒When this unit’s blue lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when ACC (ignition) is turned on and attach the front panel. To retract the antenna, detach the front panel.

The vehicle’s antenna extends regardless of turning this unit’s source on or off.

Loading a disc

•Insert a disc into the disc loading slot. Format reading will start.

For DVD-video, CD

❒ DISC AUTO is off in the default setting.

➲DISC AUTO ➞ Operation Manual

❒When a disc is already loaded in this unit, select the source by pressing SRC but- ton.

❒To eject a disc, press EJECT button.

For the map disc

❒Inserting the disc starts DVD navigation mode.

❒Removing the disc sets Memory navi mode.

❒You can use NAVI/AV button to switch between navigation map displays and audio operation displays.

❒The DVD drive plays one, standard, 12-cm or 8-cm (single) disc at a time. Do not use an adapter when playing 8-cm discs.

❒Do not insert anything other than a disc into the disc loading slot.

➲Playable discs ➞ Page 7

❒If you cannot insert a disc completely or if after you insert a disc the disc is not recog- nized, check that the label side of the disc is up. Press EJECT button to eject the disc, and check the disc for damage before inserting the disc again.

Chapter 1 How to Use Navigation Unit and Names of the Parts

13