Chapter

02Basic operation

aMulti-control (Volume knob//MUTE)

!Rotate to adjust the AV (Audio and Video) source volume.

!Press the center of Multi-control to hear the route guidance.

!Press and hold the center of Multi-con- trol to mute the AV (Audio and Video) source. To cancel the muting, press and hold it again.

bFront panel

cDetach button

Press to remove the front panel from the navigation system.

=For details, refer to Removing the front panel on this page.

1Press and hold the Detach button, and slide it down.

When you release your finger, the bottom of the front panel separates slightly from the navigation system.

2Gently grip the bottom of the front panel and slowly pull it outward.

Protecting your product from theft

pThis function is available for AVIC-X930BT and AVIC-X9310BT.

The front panel can be detached from the navigation system to discourage theft, as described below.

CAUTION

!Do not expose the front panel to excessive shock or disassemble it.

!Never grip the buttons tightly or use force when removing or attaching.

!Keep the front panel out of reach of small chil- dren to prevent them from putting it in their mouths.

!After removing the front panel, keep it in a safe place so it is not scratched or damaged.

!Keep the front panel out of direct sunlight and high temperatures.

!When removing or attaching the front panel, do so after turning the ignition switch off (ACC OFF).

Removing the front panel

pThe navigation system cannot be operated while the front panel is removed from the navigation system.

Front panel

Attaching the front panel

1Slide the front panel all the way into the navigation system.

Make sure the front panel is securely con- nected to the mounting hooks of the naviga- tion system.

2Push the lower part of the front panel until you hear a click.

If you fail to successfully attach the front panel to the navigation system, try again but be care-

ful not to force it as the panel could be damaged.

14 En