Chapter

06Searching for and selecting a location

Searching for POIs by using the data on the SD memory card

Creating a customized POI is possible by using the utility program AVIC FEEDS which is available separately, on your PC. (AVIC FEEDS will be available on our website.) Storing the customized POI properly and inserting the SD memory card enables the system to use the data for searches.

1Store the item into the SD memory card by using the AVIC FEEDS.

2Insert an SD memory card into the SD card slot.

=For details of the operation, refer to Insert- ing and ejecting an SD memory card on page 16.

3Display the “Destination Menu” screen.

=For details of the operations, refer to Screen switching overview on page 22.

4Touch [AVIC FEEDS].

The “Select POI” screen appears.

5Touch the item you want.

6Touch the POI you want.

The searched location appears on the map screen.

=For the subsequent operations, refer to Set-

ting a route to your destination on page 42.

p“History” can store up to 100 locations. If the entries reach the maximum, the new entry overwrites the oldest one.

1Display the “Destination Menu” screen.

=For details of the operations, refer to Screen switching overview on page 22.

2Touch [History].

3Touch the entry you want.

The searched location appears on the map screen.

=For the subsequent operations, refer to Set-

ting a route to your destination on page 42.

Searching for a location by coordinates

Entering a latitude and longitude pinpoints the location.

1Display the “Destination Menu” screen.

=For details of the operations, refer to Screen switching overview on page 22.

2Touch [Coordinates].

Selecting a location you searched for recently

The places that you have set as destination or waypoint in the past are automatically stored in “History”.

pIf no location is stored in Destination His- tory, you cannot select [History]. (If you perform a route calculation, you can select [History].)

40 En