Yamaha RX-V620RDS Position of the Selector Dial, Controlling this unit, Controlling your TV

Commonly Used Buttons in Any

Position of the Selector Dial

Regardless of the position of the selector dial, you can control this unit and your TV with the following buttons.

Note

•You have to set up the code for your TV in the TV position before you can control the TV.

	1
!	2
@
#	3
	4
	5

■Controlling this unit

See “Remote Control”.

1STANDBY

2 POWER

3 VOLUME +/–

4 SLEEP

Note

•If you have set up the code for your TV and set the selector dial to the TV position, this button is used to set the sleep timer for the TV.

5MUTE

Note

•If you have set up the code for your TV and set the selector dial to the TV position, this button is used to mute the TV sound.

■Controlling your TV

!TV POWER @ TV INPUT

# TV VOLUME +/–

REMOTE CONTROL FEATURES

Controlling the Components

Connected to This Unit

The example below describes the procedure for controlling a YAMAHA CD player.

1	A/B/C/D/E
	5
3
4	2

6

A/B/C/D/E

1 Set the selector dial to the

CD position.

2 Turn on the power.

3 Press INPUT.

The indicator lights up for about 3 seconds.

4 Press CD while the indicator is lit.

5 Press p.

See “Button Names and Functions in Eash Position” for the CD player operation buttons.

6 Adjust the volume.

If you set the remote control with the manufacturer

codes listed from page i at the end of this

manual, you can control other brands of components. See “Setting the Manufacturer Codes” for details.

INTRODUCTION

OPERATION ADVANCED

English

49