Riccar BRLD When to change filters, Replacing the post filter, Replacing the secondary filter

Models: BRLS BRLP BRLD

1 17
Download 17 pages 6.91 Kb
Page 12
Image 12
When to change filters

Maintenance and Care

When to change filters

At minimum, it’s recommended to replace the filters after using twelve vacuum bags.

If someone in your household is highly sensitive to airborne allergens, it is recommended to change the filter set after every six vacuum bags.

Replacing the post filter

Note: Your vacuum is equipped with either an S-Class HEPA filter or an electrostatic filter. To change either type of filter, follow the instructions below.

Open the bag compartment lid and locate the post filter below the bag.

Using the tab on the left, remove the used filter and throw away. NOTE: Filters cannot be washed and reused.

When inserting the new post filter, first position the tabs in the right side of the casing. Then, snap it into place.

Close the bag compartment lid.

Maintenance and Care

Replacing the secondary filter

Open the bag compartment lid and locate the secondary filter on the left side of the bag compartment.

Pull the front tab away from the vacuum

to remove the filter holder.

• Remove and throw away the used filter.

• Insert the new filter. Then reposition the filter holder back end first and snap into place behind the tab.

• Close the bag compartment lid.

20

21

Page 12
Image 12
Riccar BRLD, BRLP When to change filters, Replacing the post filter, Replacing the secondary filter, Maintenance and Care