Panasonic NV-GS180GN operating instructions When you stop printing halfway

Edit mode

Printing pictures by directly connecting to the printer (PictBridge)

To print pictures by directly connecting the movie camera to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.)

≥Insert a card and set to Picture Playback

Mode.

1Connect the movie camera and the printer with the supplied USB cable.

1

1USB cable

PictBridge

≥The [PictBridge] indication appears on the screen of the movie camera.

(When the printer is being recognized, the [PictBridge] indication blinks.)

≥When no card is inserted in the movie camera, the [PictBridge] indication does not appear. (You cannot print any pictures.)

≥When the movie camera and the printer are not connected properly, the [PictBridge] indication keeps blinking. (It will blink for over approx.

1 minute.) Connect the cable or check the printer.

≥We recommend using the AC adaptor as the power supply.

≥When images are displayed in multi-screen, they cannot be printed.

2Select [SINGLE PRINT] or [DPOF PRINT].

≥If there is no file with a DPOF setting, you cannot select [DPOF PRINT].

≥When you select [DPOF PRINT] for printing, set the number of prints in DPOF setting.

≥When [DPOF PRINT] is selected, print after you determine the paper size.

3Move the joystick left and right to select a desired picture, and then press it.

4Select the desired number of prints.

≥You can set up to 9 prints.

5Select the setting for date printing.

≥If the printer is not capable of date printing, this setting is unavailable.

6Select the paper size.

[STANDARD]: Size specific to the printer [4a5 INCH]

[5a7 INCH] [4a6 INCH] [A4]

≥You cannot set paper sizes not supported on the printer.

7Set [PRINT] >> [YES] to start printing.

ªWhen you stop printing halfway

Move the joystick down.

≥Avoid the following operations during printing. These operations disable proper printing. ≥Disconnecting the USB cable ≥Removing the card

≥Switching the mode dial ≥Turning off the power

≥Check the settings for the paper size, quality of print, etc. on the printer.

≥You cannot print pictures that cannot be played on the movie camera.

≥When the movie camera and the printer are connected in the Tape Recording/Playback Mode, the [ WEB] or the [ WEB] Indication may appear on the LCD monitor. However, pictures cannot be printed.

41

VQT0T93