Before using
7Press the joystick to determine the setting.
ªTo exit the menu screen
Press the [MENU] button.
ªTo get back to the previous screen
Move the joystick left.
ªAbout the menu setting
≥The menu screen does not appear during recording. And you cannot record when the menu screen appears.
ªOperating with remote control
The menu screen transition is the same as when the buttons on the main unit are used.
1Press the [MENU] button.
2Select a menu item.
≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit.
3Press the [MENU] button to exit the menu screen.
Setting date and time
If the screen shows the incorrect date/time, then adjust it.
≥Set to Tape Recording Mode or Card
Recording Mode.
1Set [BASIC] >> [CLOCK SET] >> [YES].
2006
2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.
≥The year will change as follows: 2000, 2001, ..., 2089, 2000, ...
≥The
3Press the joystick to determine the setting.
≥The clock function starts at [00] seconds.
ªAbout date/time
≥The date and time function are driven by a
≥Make sure to check the time before recording because the
ªRecharging the built-in lithium battery
≥If [0] or
6 months. (Even if the [OFF/ON] switch is set to [OFF], the battery is still being recharged.)
WARNING
THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.
14
VQT0T93
