Record mode
Quick start
This camera will be put into standby in approx. 1.7 seconds after the power is turned on. ≥Please note in Quick Start Mode approximately
half the pause recording power is being consumed.
Using Quick Start Mode will reduce the battery recording/playback time.
≥This is only activated in the following cases. ≥A tape or a card is inserted, while the Tape
Recording Mode is set.
≥A card is inserted, while the Card Recording Mode is set.
1Press the [QUICK START] button.
QUICK
START
≥The quick start recording lamp lights up. (Press the button again to cancel it.)
2Set the [OFF/ON] switch to [OFF].
OFF ON
≥The quick start is now ready.
3Set the [OFF/ON] switch to [ON].
≥This camera will be put into a recording pause in approx. 1.7 seconds after it is turned on.
ªTo cancel the quick start when the
power is set to [OFF]
Press and hold the [QUICK START] button for approx. 2 seconds. The lamp will go off and the camera will be completely turned off.
≥If the standby continues for approx. 30 minutes, then the lamp will go off and the camera will be completely turned off.
≥When you rotate the mode dial or remove the battery, the quick start recording lamp is turned off and the quick start mode is cancelled. If the movie camera is turned on and the Tape/Card Recording Mode is set though, the lamp turns on and the quick start mode is restored.
≥When the camera is
≥The zoom magnification may differ from when it is in the quick start standby mode and when the recording starts.
Backlight compensation function
This protects a backlit subject from being darkened.
≥Set to Tape/Card Recording Mode.
1Press the joystick until the icon 1 appears.
2Move the joystick right to select the backlight compensation icon [
].
ª |
|
| 1 |
|
| ||
|
|
|
|
≥The image on the screen will become brighter.
ªTo return to normal recording
Select the [
] icon again.
≥If you operate the [OFF/ON] switch or the mode dial, the backlight compensation is cancelled.
23
VQT0T93
