English

[When using Macintosh]

1 Turn the Macintosh on, and insert the provided CD-ROM into the CD-ROM drive of Macintosh.

2 Double-click the DVDHS7S icon displayed on desktop.

3Double-click the icon of “ImageMixer 3 for DVDCAM.pkg” displayed on screen.

The installer will start: Click “Continue”.

The “Read Me” screen will appear: Click “Continue”.

4 Checking licence agreement:

The licence agreement screen will appear. Set the language to be used when installing the software, and then carefully read the licence agreement: If you agree with the contents, choose “Continue”. If you accept the licence agreement, click “I agree”.

*With the provided software for Macintosh, the language used with OS will automatically be installed.

Setting language

when installing

Click

5 Choose the installation destination and type of installation, and click “Continue”. Then click “Install”.

Follow the instructions on screen for operation: Installation will start.

6 After installation is finished, the screen for exit will appear: Click “Close”.

The screen for installation will close and installation will be complete: Remove the CD-ROM.

Note:

You must have the administrator authority of the PC before installing software.

122

Page 122
Image 122
Hitachi DZ-HS500SW instruction manual 122, When using Macintosh