RECORDING DARK SUBJECTS USING LCD MONITOR LIGHT
When Programme AE is set to Low Light, you can use the light from LCD monitor to record a subject.
English
1Press the MENU button, use the 2/1/ 0//buttons to choose “Program AE” on the “Camera Functions Setup” menu screen, and then press the button.
2Use the 2/1/0//buttons to choose “Low Light”, and then press the button.
3
4 Open the LCD monitor, turn it 180º so that it faces the same direction as the lens: The LCD monitor will light white.
Note:
•Use the viewfinder to check the image to be recorded.
•The LCD monitor light allows you to record a subject up to 1 m even in a dark place.
•An
•If a subject cannot be focused properly, manually adjust the focus (see page 52).
ADJUSTING COLOUR (WHITE BALANCE)
This DVD video camera/recorder automatically adjusts the colour of subject. Change the white balance setting depending on the recording conditions.
Mode | Setting content |
|
Auto | White balance always automatically adjusted | None |
|
|
|
Set | You can manually adjust white balance to match the light | ; |
| source or situation (p. 58) | |
|
| |
|
|
|
Outdoor | To record in fine weather | < |
|
|
|
Indoor | To record under incandescent light, halogen light or bulb- | = |
| colour type fluorescent light | |
|
| |
|
|
|
57
