English

CREATING DVD-VIDEO USING IMAGES RECORDED ON HDD/DISC

You can use the images recorded on the DVD video camera/recorder to create a disc that can be viewed on DVD recorders/players.

*A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalised on this DVD video camera/recorder (see page 107).

If the file system of HDD in your PC is FAT32, no video file larger than 4 GB can be imported, due to restrictions of file system.

When using a large video file, handle it on an NTFS format HDD.

1 Connect this DVD video camera/recorder to the USB port of PC.

To save images recorded on a disc, first insert the disc you wish to save into the DVD video camera/recorder, and then connect the DVD video camera/recorder to the USB port of PC.

2 Start ImageMixer 3.

When ImageMixer 3 starts up, the launcher

shown below will appear: Click “Create

DVD-Video”.

4 Setting up project.

Set up a project. You can set up the designated save location of edited contents and image quality.

Be sure to choose “PAL” for the video system. This DVD video camera/recorder uses Dolby Digital for the audio recording format:

Choose “Dolby Digital” for audio setting. After setting up the project, click the “OK” button.

Click

Click

3 Click “Create New DVD”.

128

Page 128
Image 128
Hitachi DZ-HS500SW instruction manual 128, Creating DVD-VIDEO Using Images Recorded on HDD/DISC