Hitachi DZ-HS500SW Playing Back from Disc Navigation Screen, Adjusting Volume During Playback

Playback pause

PLAYING BACK FROM DISC NAVIGATION SCREEN

English

1 Press the DISC NAVIGATION button.

2Use the 2/1/0//buttons to select the desired scene.

The selected scene will be framed: This is called a “cursor”.

3 Press the button.

Note:

•Pressing the 0or /button will move the cursor to the preceding or following scene.

Pressing the 2or 1button will move the cursor up or down, or move to the preceding or following page.

•If there is a large number of recorded scenes, it may take time more than usual until playback of scenes starts.

Playback will start from the selected scene.

ADJUSTING VOLUME DURING PLAYBACK

If the LCD monitor is open during playback of movie, playback sound will be heard from the speaker. Adjust the sound volume using the zoom lever. Tilt it to the “T” side to increase the volume, “W” side to reduce the volume.

VOLUME

Volume

●When playback ends

The DVD video camera/ recorder will enter the

playback pause status at the last image of last scene. Pressing the or DISC NAVIGATION button will restore the Disc Navigation screen.

When the playback pause status continues for as long as 5 minutes, the Disc Navigation screen will automatically be restored.

●Playing back photos

Aphoto on DVD-RAM will be displayed for approx. 3 seconds. When playing back photos on card, playback will stop after each photo playback.

Note:

•Press the button to temporarily stop playback. Pressing the button again will start from that point.

•If you press the button after playback of the last scene on disc finishes, playback will start again from the beginning.

•Pressing the button will always restore the Disc Navigation screen.

•When playing back photos on card, “Playback” will appear. In the case of a photo with a large number of pixels, it will take some time for the photo to appear.

68