Press the DISC NAVIGATION button. Press the MENU button.

English

HDD  

Go To

From the Disc Navigation screen, you can jump to the first scene or last scene, and playback will start from that point.

MOVING TO BEGINNING (END) OF HDD/DVD/CARD

1 Press the DISC NAVIGATION button.

3 Use the 2/1/0///buttons to

2 Press the MENU button.

choose “Top” or “End” on the “Go To” menu

screen, and then press the button.

 

4 Press the button to start playback.

HDD/DVD/Card Management

HDD 

INITIALISING HDD/DVD/CARD

Initialising the HDD, a DVD-RAM/DVD-RW/+RW or card will allow you to delete any recorded contents. Before using a DVD-RW/+RW on this video camera/recorder, you must format it.

Before You Begin

Be sure to use the AC adapter/charger to power the DVD video camera/ recorder for initialisation. If the DVD video camera/recorder is turned off during initialisation and the initialisation is interrupted, incorrect initialisation will result and the incorrectly initialised disc will be unusable.

If you insert a brand-new DVD-RW/+RW, message “DVD is not formatted” will appear: Initialise the disc, following the subsequent messages (p. 38).

1

2

3Use the 2/1/0///buttons to choose “Format HDD”, “Format DVD” or “Format Card” on the “HDD Setting”, “DVD Setting” or “Card” menu screen, and then press the button.

The screen for verifying “Format HDD”, “Format DVD” or “Format Card” will appear.

4 Choose “YES”, and then press the  button.

When using DVD-RW, a screen for prompting you to choose the VF or VR mode will appear.

Choose “NO” to cancel initialisation.

Note:

If you wish to delete all recorded contents, it is recommended that you use initialisation, which will delete all the scenes in much less time than using the scene delete function.

Initialisation will delete all the recorded contents on HDD, disc or card: Be careful not to delete data by mistake.

It may not be possible to initialise a disc with many scratches or dirt: Such a disc cannot be used (p. 9).

This DVD video camera/recorder may not recognise some discs or cards that have been initialised on PC or a device other than this DVD video camera/ recorder.

If you attempt to initialise a disc or card in this DVD video camera/recorder when it is connected to PC via PC connection cable, the disc or card may not be initialised and may be unusable on this DVD video camera/recorder.

If you choose the VR mode when initialising a finalised DVD-RW (VR-mode), the finalisation will not be released. (The DVD-RW will be a finalised disc without any recorded data, and recording will be possible on it.)

Choosing the VF mode will release the finalisation of the disc.

104

Page 104
Image 104
Hitachi DZ-HS500SW Go To, HDD/DVD/Card Management, 104, Moving to Beginning END of HDD/DVD/CARD, Initialising HDD/DVD/CARD