Siemens A31003-S1730-U102-1-7619 4.6The most important error messages during logon, Field

Program activation

The most important error messages during logon

4.6The most important error messages during logon

The below list covers the most important error messages that may appear during the logon:

Field		Description
		Unable to set up TCP/IP connection to OScAR-
		Pro-TT Server.
		Among other reasons, this message may surface
		because:
		– you entered a wrong IP address or IP
		port
		– the attempt to connect was forestalled by
		a firewall on your local computer, on the
		computer used for OScAR-Pro-TT Serv-
		er, or along the route
		– the application OScAR-Pro-TT Server is
		not active
		The attempt of the OpenScape Alarm Response
		Professional to log on to OScAR-Pro-TT Server
		with the assigned user name failed because an-
		other application is already logged on with this
		name.
		The application is not enabled in the chipcard
		data of OScAR-Pro-TT Server.
		If this message appears, verify that:
		– the OScAR-Pro server entered in OS-
		cAR-Pro-TT Server is properly marked
		as primary connection
		– OScAR-Pro-TT Server has already been
		connected successfully at least once
		with the OScAR-Pro server (been ’on-
		line’)
		– you have acquired the application right-
		fully and the chipcard of your OScAR-Pro
		server is equipped with the pertinent en-
		abled information
Table 4-2	The most important fault messages during logon

	07/2010
4-6	DAKS OScAR-Pro-TT Dataimport-Tool, User Manual