Siemens A31003-S1730-U102-1-7619 user manual Task, Window, Installation

Installation

Installing the OpenScape Alarm Response Professional

3.1Installing the OpenScape Alarm Response Professional

The entire OpenScape Alarm Response Professional can all be installed in one process.

Please bear in mind that under Windows 2000/XP/2003 Server, you must have ad- >ministrative rights to install the OpenScape Alarm Response Professional!

Make sure that the following requirements are met before you begin to install the software on your PC:

●Microsoft Windows 2000, Windows XP or Windows 2003 Server is already installed on your computer.

●You are familiar with the Windows operating system and know how to install software.

●OScAR-Pro Release 7 or OScAR V3 R2, respectively, are already installed on your com- puter or network (see OScAR-Pro User Manual).

●OScAR-Pro-TT Server has already been connected at least once with the corresponding OScAR-Pro server (been ’online’),

>return to the previous window and make changes, if necessary. You can terminate the installation at any time with Cancel.Follow the instructions issued by the program during the installation. Use Back to

No.	Task		Window
1.	Insert the installation CD in the CD-ROM
	drive.
	Should the installation software fail to start
	automatically, start the CD installation manu-
	ally from the Windows interface with the
	Run... menu command:
	To do so, enter
	<CD-ROM drive>:\cdsetup
	e.g.: d:\cdsetup
	in the command line and click OK.
Table 3-1		Installing the DAKS OScAR-Pro-TT Dataimport-Tool

	07/2010
3-2	DAKS OScAR-Pro-TT Dataimport-Tool, User Manual