Siemens A31003-S1730-U102-1-7619 1.2Conventions and symbols used in this Manual, Symbols

Conventions and general instructions

Conventions and symbols used in this Manual

1.2Conventions and symbols used in this Manual

Conventions

The following conventions apply to this User Manual:

Text		All texts taken from the described files and any text you may enter
		into these files will appear in the non-proportional Courier type-
		face.
Password 123456 ...		Details that appear in the continuous text and that are of particu-
		lar importance or must be heeded are output in bold print. But-
		tons are euqally marked in bold.
global.cfg file		Files and directories are indicated by the non-proportional
		typeface Courier.
"Name"		Field names, menu names and window descriptions are placed in
		quotation marks.
<Place holder>		Entries or outputs, both of which may vary depending on the indi-
		vidual event and settings, are always placed in angle brackets and
		written in italics.
Table 1-1	Conventions

Symbols

The following symbols are used in this Manual:

>The "i" is used to signal useful additional information.

07/2010
DAKS OScAR-Pro-TT Dataimport-Tool, User Manual	1-3