Siemens A31003-S1730-U102-1-7619 user manual 7-24

7-24

07/2010 DAKS OScAR-Pro-TT Dataimport-Tool, User Manual

Field name		Keyword	Value range	Dflt. val-	Description
				ue
					Bit 15: Active number signifies characters appended to ID
					+	Bit 4 may not be set.
					+	Bits 6 and 7 may only be set in combination with
						bits 0 and 1.
Other Call Profile pa-		iExProperties	-	0	Bitmask of the other Call Profile parameters:
rameters					Bit 00: assignment of most recent announcements before the
						dial-up
					Bit 01:	<reserved>
					Bit 02:	Confirmation callback after setting the active number.
Display parameters		iDispProps	see Section	0	Bit mask of the display texts, display numbers, and DTMF message
			7.5.8, „Coding
			of iDispProps“
Call acceptance code		sPickUpCode	4 characters	<empty>	Call acceptance code of the Call Profile.
Max. no. of parallel ac-		iNoOfChannels	1..99	1	The max. number of concurrent access to this profile.
cess
Parameters if authori-		CallScr_Action	s. description	0	The response of the system if the authorization is insufficient:
zation is insufficient					0:	disconnect caller
					1:	play back announcement
					2:	dial subscriber
Ident. of announce-		CallScr_Msg	-1,	-1	The identifier of the announcement if the authorization is insuffi-
ment if authorization is			valid ident.		cient.	If CallScr_Action is set to 1, this value may not be
insufficient					+
						-1.
Ident. of subs. if au-		CallScr_Subs	-1,	-1	The identifier of the subscriber to be called if the authorization is in-
thorization is insuffi-			valid ident.		sufficient.	If CallScr_Action is set to 2, this value may not be
cient					+
						-1.
Ident. of the info mes-		iMsg_Pervious	-1,	-1	The identifier of the information message played before the dial-up
sage played before			valid ident.		phases.
the dial-up.
Table 7-8	Data fields of the “Call Profile“ table

Description of INI files

Table fields