Siemens A31003-S1730-U102-1-7619 user manual Field name Keyword Value range Dflt. val

07/2010 DAKSOScAR-	Field name		Keyword	Value range	Dflt. val-	Bit 1:	Convene only from 1st phone number of initiator
						Description
					ue
	Dial-in parameters		iDialInProps	s. description	0	Bit mask of the conference dial-in parameters:
Pro-						Bit 0:	PIN required to convene
						Bit 2:	PIN required for active dial-in
TT						Bit 3:	Dialing from 1st phone number required for active dial-
							in
Dataimport-Tool,						+
							Bit 1 only if Bit 0 is set.
						Bit 4:	PIN required for passive dial-in
						Bit 5:	Dialing from 1st phone number required for passive
							dial-in
						Bit 6:	Active dialing subscriber becomes master
User						+	Bit 3 only if Bit 2 is set.
						+	Bit 5 only if Bit 4 is set.
Manual						+	Bit 6 only if Bit 2 is set.
	PC activity parameters		iPcProps	s. description	0	Bit mask of the parameters for PC activity during the conference:
						Bit 0:	PC logs conference start/end
						Bit 1:	PC also logs conferee states
						Bit 2:	Conf. can also be moderated via PC
						+	Bit 1 only if Bit 0 is set.
						+	Bit 2 only if Bits 1 and 2 are set.
	ID to convene		sIdLaunch	4 characters	<empty>	The ID to convene the conference.
	ID for active dial-in		sIdActive	4 characters	<empty>	The ID to actively dial into the conference.
	ID for passive dial-in		sIdPassive	4 characters	<empty>	The ID for the passive dial-in to the conference.
	Display parameters		iDispProps	see Section	0	Bit mask of the display texts, display numbers, and DTMF mes-
				7.5.8, „Coding		sage
				of iDispProps“
	Simulated substitute di-		sNextDial	10 characters	<empty>	Simulated substitute dialing of the conference(<empty>=none).
	aling
	Max. number of non-		iMaxNoDialIn	0..60	0	Max. number of non-predefined dial-in subscribers
	predefined subs.
	Table 7-6	Data fields of the “Conference“ table
7-19

Description of INI files

Table fields