Siemens A31003-S1730-U102-1-7619 user manual 7-18

7-18

07/2010 DAKS OScAR-Pro-TT Dataimport-Tool, User Manual

Field name		Keyword	Value range	Dflt. val-	Description
				ue
Conference parame-		iProperties	s. description	0	Bit mask of the conference parameters:
ters					Bit 00:	Use Cornet-N(Q)® features
					Bit 01:	Monitor subscriber status
					Bit 02:	Is a high priority conference
					Bit 03:	Subscribers dialing in with PIN must be predefined
					Bit 04:	No audio signals during this conference
					Bit 06:	Conference is always active
					Bit 07:	Point-to-multipoint conference
					Bit 08:	End dial-up at first active subscriber reached
					Bit 09:	Master can manually extend conference
					Bit 10:	Delayed conference start
					Bit 11:	Alternative dialing of 1st and 2nd phone number
					Bit 12:	Switch to mute/active via DTMF enabled
					Bit 13:	Privacy during conference enabled
					Bit 14:	Called conferees join only after pressing * key
					Bit 15:	Queuing when dialing into non-active conference
					+	Bits 06 and 07 are mutually exclusive.
					+	Bit 11 only in combination with Bit 08.
					+	Bit 05 of iProperties and Bit 01 iAddProps are
						mutually exclusive.
Other conference pa-		iAddProps	s. description	0	Bit mask of the other conference parameters:
rameters					Bit 00:	Use priority (line 1) prefix in dial-up
					Bit 01:	Output user ID to all conferees
					Bit 02:	Accept dial-up of directory subscribers for Progressive
						conferences and ad-hoc dialing via PC
					Bit 03:	Accept only dial-up of group members for Progressive
						conferences and ad-hoc dialing via PC
					Bit 04:	Start conference by operator with call number dialing
					Bit 05:	Conference with point-to-multipoint functionality
					Bit 06:	Delayed dialing of non-masters
					+	Bit 01 of iAddProps and Bit 05 of iProperties are
						mutually exclusive.
Table 7-6	Data fields of the “Conference“ table

Description of INI files

Table fields