●Battery charged status
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/ charger:
Charge status | CHARGE indicator |
During charge | Lit |
|
|
Charge complete | Goes out |
|
|
Note:
See “Troubleshooting” on page 145 when the CHARGE indicator blinks.
●Reference for time required to charge battery (at approx. 25ºC)
The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
English
1 Fit the battery to the battery attachment platform on this DVD video camera/recorder and slide it downward until a click is heard.
Terminal side must be down.
Note:
•Make sure that the battery is in the correct orientation.
•Make sure that the battery is securely attached: Incomplete attachment could cause the battery to fall, resulting in damage.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1 While holding down the BATTERY EJECT button, slide the battery upward to remove it.
Note:
•For safety, be sure to turn the DVD video camera/ recorder off before attaching or removing the battery.
•Be careful not to drop the removed battery.
•If the battery remains attached, minute level current will flow even if the DVD video camera/recorder is off, and the battery will discharge.
•Set the power switch to OFF before removing the battery.
27
