
English
1Press the MENU button, use the 2/1/ 0//buttons to choose “White Bal.” on the “Camera Functions Setup” menu screen, and then press the button.
2 Choose the desired option, and then press the
button.
3 Press the MENU button to end the setting.
Note:
•The white balance mode can be confirmed using the
•The white balance setting will be stored in memory even when the DVD video camera/recorder is turned off.
•Do not block the infrared sensor with hand, etc.
Infrared sensor block
•If a tele or
•Be sure to remove the lens cap before turning the DVD video camera/recorder on: If the DVD video camera/recorder is turned on with the lens capped, the white balance will not work normally.
●Setting white balance manually
1 Point the DVD video camera/ recorder at a white object so that it fills
the screen. Use an object that is not transparent. If focus is not
correct when the
white object fills the screen, manually focus the object, referring to “Manually Focusing Subject” (see page 52).
2Press the MENU button, use the 2/1/ 0//buttons to choose “White Bal.”, “Set” on the “Camera Functions Setup” menu screen, and then press the button.
3Hold button pressed until the “;” indicator changes from blinking to a steady light. When the “;” indicator lights, the white balance setting will be complete.
4 Press the button to end the setting.
Note:
•The white balance set using the “Set” option will be stored in memory until it is
•Do not use a coloured object when setting the white balance: The appropriate tint cannot be set.
•If “Input Source: LINE” has been specified, you cannot use the “Set” mode of white balance (p. 63) .
•The setting on white balance “Set” may not be possible in a dark place. Also, the white balance cannot be set when the zoom bar is in the digital zoom range (p. 50). In such status, the “;” indicator will remain blinking. Set the white balance in a bright place with “Dig. Zoom: Off” specified.
•If the recording conditions have changed,
•The setting will be stored in memory even when the DVD video camera/recorder is turned off: The “;” indicator will blink when the DVD video camera/ recorder is turned on next time.
58