CONTROLS AND FUNCTIONS
■When selecting a preset station number
Using the Remote Control
30° | 30° Approximately 6 m (20 feet) |
1 Set code number “0023” in the AMP/TUN (or
DSP/TUN) position.
See “Setting the Manufacturer Code” for setting the code.
2 Set the selector dial to the AMP/TUN (or
DSP/TUN) position.
3 You can select a preset station number directly with the numeric buttons (1 to 8).
See “Tuning in to a Preset Station”.
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.
■Handling the remote control
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–high humidity or temperature such as near a heater, stove or bath;
–dusty places; or
–in places subject to extremely low temperatures.
8