Yamaha RX-V620RDS Specifications, Audio Section, Video Section, Fm Section, Am Section, General

SPECIFICATIONS

AUDIO SECTION

•Minimum RMS Output Power for Main, Center, Rear

20 Hz to 20 kHz, 0.06% THD, 8 ohms	................................. 90 W
1 kHz, 0.06% THD, 8 ohms	100 W

• DIN Standard Output Power
[Europe model only]
1 kHz, 0.7% THD, 4 ohms	130 W

• IEC Output Power
[Europe model only]
1 kHz, 0.06% THD, 8 ohms	100 W

•Dynamic Power (IHF)

8/6/4/2 ohms 120/140/175/210 W

• Damping Factor
20 Hz to 20 kHz, 8 ohms	80 or more

•Frequency Response

CD to Main L/R 10 Hz to 100 kHz, –3 dB

•RIAA Equalization Deviation

PHONO (MM) ±0.5 dB

•Total Harmonic Distortion

PHONO MM (20 Hz to 20 kHz, 1 V, REC OUT) .... 0.02% or less

CD, etc. (20 Hz to 20 kHz, 45 W, 8 ohms, Main L/R)

............................................................................... 0.06% or less

• Signal to Noise Ratio (IHF-A Network)
PHONO MM to REC OUT (5 mV, shorted)	81 dB or more
CD (250 mV, shorted) to Main L/R, Effect Off	.... 100 dB or more
• Residual Noise................................................................(IHF-A Network)	150 ∝V or less
Main L/R
• Channel Separation (1 kHz/10 kHz)
CD (5.1 kohms terminated) to Main L/R	60 dB/45 dB
• Tone Control (Main L/R)
BASS Boost/Cut	±10 dB/50 Hz
TREBLE Boost/Cut	±10 dB/20 kHz
BASS EXTENSION	+6 dB/60 Hz
• Phones Output	400 mV/560 ohms
• Input Sensitivity
CD, etc	150 mV/47 kohms
PHONO	2.5 mV/47 kohms
6CH INPUT	150 mV/47 kohms
• Maximum Input Signal
PHONO MM (1 kHz, 0.1% THD)	100 mV or more
CD, etc. (1 kHz, 0.5% THD)	2.2 V or more
• Output Level
REC OUT	150 mV/1.2 kohms
PRE OUT	2.1 V/1.2 kohms
SUBWOOFER	4.0 V/1.2 kohms

VIDEO SECTION

• Video Signal Type	PAL
• Composite Video Signal Level	1 Vp-p/75 ohms

•S-Video Signal Level

Y	........................................................................... 1 Vp-p/75 ohms
C	.................................................................... 0.286 Vp-p/75 ohms

•Component Video Signal Level

Y	/C..........................................................................., P /C	1 Vp-p/75 ohms
P		0.7 Vp-p/75 ohms
B	B R R
• Signal to Noise Ratio		50 dB or more

•Frequency Response (MONITOR OUT)

Composite, S-Video	5 Hz to 10 MHz, –3 dB
Component	DC to 30 MHz, –3 dB

FM SECTION

• Tuning Range 87.50 to 108.00 MHz

•50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono/Stereo	1.6 ∝V (15.3 dBf) /23 ∝V (38.5 dBf)
• Alternate Channel Selectivity (400 kHz)		75 dB

•Signal to Noise Ratio (IHF)

Mono/Stereo 81 dB/75 dB

•Harmonic Distortion (1 kHz)

	Mono/Stereo	0.1%/0.2%
•	Stereo Separation (1 kHz)	48 dB
•	Frequency Response (20 Hz to 15 kHz)	±1 dB

AM SECTION

• Tuning Range	531 to 1611 kHz
• Usable Sensitivity	300 ∝V/m
• Signal to Noise Ratio	52 dB

GENERAL

• Power Supply	AC 230 V/50 Hz
• Power Consumption	260 W
Standby Mode	0.9 W

•AC Outlets (Total 100 W maximum)

[Europe model]	2 (SWITCHED)
[U.K. model]	1 (SWITCHED)
• Dimension (W x H x D)	435 x 151 x 390 mm
• Weight	10.5 kg
• Accessories	Remote Control

....................................................................................... Batteries

......................................................................... AM loop antenna

...................................................................... Indoor FM antenna

................ 75-ohm/300-ohm antenna adapter (U.K. model only)

................................................................. Quick Reference Card

........................................................................ Connection Guide

* Specifications are subject to change without notice.

68