3HP TONE CTRL (headphone tone control)
Use this feature to adjust the level of the bass and treble when you use your headphones.
Control range (dB):
Initial setting: 0 dB for both BASS and TRBL (treble)
3 HP TONE CTRL
BASS |
|
TRBL– | 0dB + |
4 I/O ASSIGNMENT
It is possible to assign jacks according to the component to be used if this unit’s COMPONENT VIDEO input jack or DIGITAL INPUT/OUTPUT jack settings (component names for jacks) differ from that component. This makes it possible to change the jack assignment and effectively connect more component.
Once you assign, you can select that component with INPUT l / h (or the input selector buttons).
■4A CMPNT-V INPUT (for the
COMPONENT VIDEO jacks)
Initial settings: [A] DVD
[B]
4A
[A]• • • • • DVD
[B]• • • • •
SET MENU
■4C OPTICAL IN (for the OPTICAL INPUT jacks)
Initial settings: (2)
(3)DVD
(4)
4C OPTICAL IN
(2)• • • • •
(3)• • • • • DVD
(4)• • • • •
■4D COAXIAL IN (for the COAXIAL INPUT jack)
Initial setting: (5) CD
4D COAXIAL IN
(5) • • • • • CD
Note
•You cannot select an item more than once for the same type of jack.
5INPUT MODE (initial input mode)
Use this feature to designate the input mode when turning on the power of this unit with the source component connected to more than one type of input jacks.
Choices: AUTO, LAST
Initial setting: AUTO
OPERATION | ADVANCED |
|
|
■4B OPTICAL OUT (for the OPTICAL OUTPUT jack)
Initial setting: (1)
4B OPTICAL OUT
(1) • • • • •
5 INPUT MODE
AUTOLAST
/: Exit
AUTO
Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last input mode used for that source.
English
43