Yamaha RX-V620RDS Presetting Stations, Automatically presetting stations for RDS stations

TUNING

Presetting Stations

■Automatically presetting stations (for RDS stations)

You can use the automatic preset tuning feature to store RDS stations. This function enables the unit to automatically tune in to RDS stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset station by selecting the preset station number (see “Tuning in to a Preset Station”).

VOLUME

	RDS MODE/FREQ	EON
STANDBY	PTY SEEK
/ON	MODE	START

INPUT MODE 6CH INPUT

BASS

BASS

TREBLE

SPEAKERS

INPUT

EXTENSION

A

B

DSP

PRESET

TUNING

EFFECT

PROGRAM

/TUNING

FM/AM

MEMORY

MODE

ON

OFF

–

+

–

+

ON

OFF

EDIT

MAN'L/AUTO FM

AUTO/MAN'L MONO

PHONES

S VIDEO

VIDEO

L AUDIO

R

OPTICAL

SILENT

VIDEO AUX

1 3 2

1 Press FM/AM to select the FM band.

FM/AM

2 Press TUNING MODE (AUTO/MAN’L MONO) so that the “AUTO” indicator lights up on the front panel display.

TUNING	AUTO
MODE

Lights up

3 Press and hold MEMORY (MAN’L/AUTO FM) for more than 3 seconds.

The preset number, the “MEMORY” and “AUTO” indicators flash. Then, after about 5 seconds, automatic preset tuning begins from the frequency currently displayed toward the higher frequencies.

MEMORY

MAN'L/AUTO

V-AUX VCR2/DVR VCR 1 D-TV/CBL DVD MD/CD-R TUNER

AUTO MEMORY

VOLUME

When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.

Notes

•Any stored station data existing under a preset number is cleared when you store a new station under that preset number.

•The reception mode is stored along with the station frequency.

•You can manually replace a preset station with another FM or AM station by simply following the procedure in the section “Manually presetting stations”.

•If the number of the received stations does not reach E8, automatic preset tuning has automatically stopped after searching all stations.

•Only RDS stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune in to it manually in the monaural mode, and store it by following the procedure in “Manually presetting stations”. (There may be a case that this unit cannot receive a station which could be received by using the automatic tuning method. This is because this unit receives a large amount of PI (Program Identification) data along with the station.)

Automatic preset tuning options

You can select the preset number from which the unit will store RDS stations and/or begin tuning toward lower frequencies. Before automatic preset tuning begins (after pressing MEMORY in step 3):

1.Turn the multi jog knob to select the preset number under which the first station will be stored. Automatic preset tuning will stop when stations have all been stored up to E8.

2.Press PRESET/TUNING (EDIT) to turn off “ z ” and then turn the multi jog knob to the left to begin tuning toward lower frequencies.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the preset stations may be cleared. If so, store the stations again by using the presetting station methods.

32