Relay play on two DJ players
1 Connect the
For instructions on connecting, see Using the relay play function on page 14.
2Set the DJ mixer’s cross fader to the center position.
3Turn auto cue on for both DJ players.
The DJ players’ auto cue indicators light.
4 Start playback on this unit.
When playback of the first track on this unit finishes, playback automatically begins on the other DJ player. This unit cues at the beginning of the next track and is set to the pause mode. This operation is repeated for relay play on the two DJ players.
!The medium can be changed and the cue point set on the DJ player that is in standby.
!The fader start function does not work during relay play.
!Relay play may not be possible if the two DJ players are not con- nected to the same DJ mixer.
!If the power of the currently playing DJ player is turned off, play- back may start on the other DJ player.
Changing the settings
| TIME MODE | BACK |
|
| i | l |
|
| AUTO CUE |
|
|
| k | SELECT PUSH |
|
| DISPLAY |
|
|
USB | j | m |
|
STOP | DISC | ||
| UTILITY |
| |
| n |
| |
|
|
| |
| SOURCE SELECT | PLAYLIST | BPM |
MP3/AAC | LOCK |
| |
WAV/AIFF |
|
1 Press [DISPLAY (UTILITY)] J for at least 1 second.
The [UTILITY] screen is displayed.
2 Use the rotary selector M to change the setting.
!Press [BACK] L to return to the previous screen.
3 Press the rotary selector M.
The changed settings are stored.
!To close the [UTILITY] screen, press [DISPLAY (UTILITY)] or [BACK].
Operations
Using the DJ software
The
To use this unit as an audio device, install the driver software on the computer beforehand (page 11). This unit must also be selected in the DJ software’s audio output device settings. For details, see your DJ software’s operating instructions.
1 Connect the USB port on this unit to your computer.
For instructions on connecting, see Using DJ software on page 14.
2 Press [] for at least 1 second.
The [CONTROL MODE] screen appears on the main unit display.
3 Start the DJ software.
Communication with the DJ software starts.
The DJ software can be operated using this unit’s buttons and controls.
!It may not be possible to use some buttons to operate the DJ software.
!For messages output by the
Changing the MIDI channel setting
1 Press [DISPLAY (UTILITY)] J for at least 1 second.
The [UTILITY] screen is displayed.
2 Turn the rotary selector M, then press it.
Select [MIDI CH.].
3 Turn the rotary selector M, then press it.
Select the MIDI channel and change the setting. A setting from 1 – 16 can be selected.
4 Press the rotary selector M.
The changed MIDI channel settings are stored.
!To close the [UTILITY] screen, press [DISPLAY (UTILITY)] or [BACK].
Setting preferences
Options | Selection items | Descriptions | |
settings | |||
|
| ||
| For details, see Chang- | ||
A. CUE LEVEL | ing the auto cue level on | ||
| page 18. | ||
|
|
| |
MIDI CHANNEL | 1* to 16 | — | |
|
| For details, see About the | |
AUTO STANDBY | OFF/20 min*/40 min/60 min | auto standby function on | |
|
| page 23. | |
|
|
| |
|
| Sets the browsing method | |
LIBRARY CRE- | LIBRARY*/FOLDER | for media on which Pioneer | |
ATOR | |||
| |||
|
| recorded. | |
VERSION No. | — | Displays the | |
software version. | |||
|
|
*: Setting upon purchase
About the auto standby function
When the auto standby function is turned on, the power is automatically set to the standby mode after the set time has passed with all of the conditions below met.
—That this unit’s buttons, controls, etc., are not operated.
—That no track is played.
En 23