When [o] is pressed, playback returns to the beginning of the currently playing track. When pressed twice in a row, playback returns to the beginning of the previous track.

!When auto cue is turned on, the set searches for the beginning of the track and pauses there (page 18).

Setting Cue

1 During playback, press [PLAY/PAUSEf] B.

Playback is paused.

2 Press [CUE] A.

The point at which the track is paused is set as the cue point. The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator lights. No sound is output at this time.

!When a new cue point is set, the previously set cue point is canceled.

Adjusting the cue point position

1While pausing at the cue point, press [SEARCH m, n] 9.

The [PLAY/PAUSEf] and [CUE] indicators flash.

2 Press [SEARCH m, n] 9.

The cue point can be fine-adjusted in units of single frames.

!The same operation is possible using the jog dial.

3 Press [CUE] A.

The position at which the button was pressed is set as the new cue point.

!When a new cue point is set, the previously set cue point is canceled.

Returning to Cue Point (Back Cue)

During playback, press [CUE] A.

The set immediately returns to the currently set cue point and pauses.

!When [PLAY/PAUSEf] is pressed, playback starts from the cue point.

Checking Cue Point (Cue Point Sampler)

After returning to the cue point, press and hold in [CUE] A.

Playback starts from the set cue point. Playback continues while the button is held in.

Setting Cue Point during playback (Real Time Cue)

During playback, press [LOOP IN/CUE (HOT LOOP)] E.

The point at which the button was pressed is set as the cue point.

Setting auto cue

When a track is loaded or the track search operation is performed, the silent section at the beginning of the track is skipped and the cue point is automatically set at the point immediately before the sound starts.

Press [TIME MODE (AUTO CUE)] I for at least 1 second.

Auto cue is set to on.

[A. CUE] lights on the main unit display.

!When [TIME MODE (AUTO CUE)] is pressed again for at least 1 second, auto cue is set to off.

18En

!The auto cue level setting remains in the memory, even when the power is turned off.

Changing the auto cue level

The acoustic pressure level identified as a silent section with the auto cue function can be selected from eight levels.

–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB

!The auto cue level setting remains in the memory, even when the power is turned off.

!The auto cue level can be changed using one of the procedures described below.

Using [DISPLAY (UTILITY)] J

1 Press [DISPLAY (UTILITY)] J for at least 1 second.

The [UTILITY] screen is displayed.

2 Turn the rotary selector M, then press it.

Select [A. CUE LEVEL].

3 Turn the rotary selector M, then press it.

The auto cue level setting changes.

Using [TIME MODE (AUTO CUE)] I

1Press [TIME MODE (AUTO CUE)] I for at least 5 seconds.

The auto cue level setting changing mode is set.

The current auto cue level is shown on the main unit display.

2 Turn the rotary selector M, then press it.

The auto cue level setting changes.