1Press [u] 1 to turn this unit’s power off, then wait at least 1 minute.

Never forcibly eject a disc directly after turning off the set’s power. Doing so is dangerous for the reasons described below.

!The disc will still be spinning when ejected and could hit your fingers, etc., causing injury.

!Also, the disc clamp will rotate in an unstable way, and the disc could get scratched.

About the power switch of this unit

To turn the power on

Press [u] 1.

Turn on the power of this unit.

The [u] indicator lights green.

2Use the included disc force eject pin. (Do not use anything else.)

The included disc force eject pin is mounted on the CDJ-350’s bottom panel. When the pin is inserted all the way into the insertion hole, the disc is ejected 5 mm to 10 mm out of the disc insertion slot. Grasp the disc with your fingers and pull it out.

Loading USB devices

Connect the USB device to the USB device insertion slot 3.

The [USB STOP] indicator lights.

Removing USB devices from the set

!Be sure to follow the procedure below when removing USB devices from the set. Removing a USB device without following this procedure could erase the set’s management data and make it impossible to read the USB device.

!When turning the set’s power off, be sure to remove the USB device first.

1 Press [USB STOP] 4 for at least 2 seconds.

The [USB STOP] indicator turns off.

2 Disconnect the USB device.

Basic Operations (player, source select and browse sections)

3

TIME MODE

 

 

 

 

 

 

BACK

 

i

 

 

 

 

 

l

 

 

AUTO CUE

 

 

 

 

 

 

 

 

 

k

 

 

 

 

 

SELECT PUSH

 

DISPLAY

 

 

 

 

 

 

 

 

4 STOPUSB

j

 

 

 

 

m

 

DISC

 

UTILITY

 

 

 

 

 

 

 

 

 

 

 

 

n

 

 

 

 

 

 

 

 

 

 

5

SOURCE SELECT 6

 

 

 

7

PLAYLIST

BPM

 

MP3/AAC

 

 

 

 

LOCK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WAV/AIFF

 

 

 

 

 

 

 

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

 

 

BEAT LOOP

 

 

VINYL MODE

 

e

 

LOOP

 

 

 

 

 

 

 

 

 

 

 

 

 

8

HOT LOOP

OUT ADJUST

f g

h

—

LOOP DIVIDE

+

 

TEMPO RANGE

 

 

SEARCH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER TEMPO

9

 

 

 

 

 

 

 

cd

TEMPO

0

CUE

a

PLAY/PAUSE

REV

FWD

b

MULTI PLAYER

 

 To set to the standby mode

Operations

 

When this unit’s power is on, press [u] 1 for at least 1

 

second.

 

This unit is set to the standby mode.

 

The [u] indicator lights red.

 

!When [u] is pressed again, the power turns on.

!This unit is equipped with an auto standby function. For details, see About the auto standby function on page 23.

Playback

1 Load the source onto this unit.

2 Press [] 6 or [] 7 for at least 1 second.

This selects the source.

3 Turn the rotary selector M.

Select the track.

!To move to lower layers in a folder, select the folder then press the rotary selector.

!To return to higher layers, press [BACK] L.

!Press [BACK] for more than 1 second to move to the top layer.

4 Press the rotary selector M.

The track is loaded and playback begins.

!When a disc containing music files recorded with a hierarchical structure is loaded, playback starts from the tracks in the upper- most level.

Pausing

During playback, press [PLAY/PAUSEf] B.

!Playback resumes when [PLAY/PAUSEf] is pressed again.

Resuming playback from the position playing just before the disc was ejected (Resume)

After ejecting the disc, immediately reload that same disc into this unit.

!The resume function only works when the same disc is ejected then reloaded before loading another disc.

!The resume function does not work for USB devices.

Forward and reverse scanning

Press [SEARCH m, n] 9.

The disc is forwarded when [n] is pressed and held in.

The disc is reversed when [m] is pressed and held in.

Finding the beginnings of tracks (Track Search)

Press [TRACK SEARCH o, p] 8.

Press the [p] to move to the beginning of the next track.

En 17