Pioneer manual Click OK, CDJ-400Audio Output Terminal Device/Channel Name

2

3 Select the output terminal of the CDJ-400 as a sound card.

•Sound card 1 (SC1):

After clicking the check box for [Sound Card 1 (SC1)] ON, click to select the audio output terminal (device/channel name) from the list of sound cards.

•Sound card 2 (SC2):

After clicking the check box for [Sound Card 2 (SC2)] ON, click to select the audio output terminal (device/channel name) from the list of sound cards.

CDJ-400 Audio Output Terminal (Device/Channel Name)

If one CDJ-400 is connected:

“PIONEER CDJ-400 ASIO” is displayed in the list of sound cards. If two CDJ-400s are connected:

Both “PIONEER CDJ-400 ASIO: CDJ-400 1” and “PIONEER CDJ-400 ASIO: CDJ- 400 2” are displayed in the list of sound cards. “CDJ-400 1” or “CDJ-400 2” is displayed in the CDJ-400 display corresponding to its respective channel, so select the CDJ-400 that is positioned on the left for player A and the CDJ-400 positioned on the right for player B.

Selecting a Sound Card:

You can select audio devices other than the CDJ-400 as the sound card. When one is selected, the DJS audio is output from the selected audio device and audio is not output from the CDJ-400 Audio output connectors.

4 Click [OK].

• Click [OK]. The [Mixer/Sound Card] setting screen will close.

Selecting a Sound Card

Sound cards and/or audio units other than the CDJ-400 may be selected from the sound cards that are displayed in the list.

When one is selected, the DJS audio is output from the selected sound card or audio unit and audio is not output from the CDJ-400 audio output terminal.

‘Configuration when using the DJS Mixer Functions (Example of Connections)’

‘Configuration when using an External DJ mixer (Example of Connections)’

Adding Audio Devices

If your computer only has one audio output system, please add another audio device, such as a sound card or an audio unit.

For information on connecting your computer with audio devices as well as on driver installation, please refer to the Operating Instructions of each audio device.

Adjusting the Delay Time

If you are using more than one sound card and/or audio unit and there are differences in their responsiveness, you can match them up by setting a delay time (adding a delay time) for the audio output with a fast response time to the audio output timing of the audio output unit with the slower response time.

If you are using two CDJ-400s, no adjustments in the delay time are required. Set the delay time of sound card 1 (SC1) and sound card 2 (SC2) to 0 msec.

Adjusting the Buffer Size

If the audio gets interrupted during playback, increase the size of the buffer.

Player L (List Player)

If your computer has three or more audio output systems, you can output audio for three players, namely player A, player B and a list player.

DJS Ver. 1.500 7