BEFORE OPERATIONS: CAUTIONS REGARDING HANDLING

Storing Discs

÷Discs are made of the same kinds of plastic used for conventional analog au- dio records. Be careful not to allow discs to warp. Always store discs in their cases vertically, avoiding locations with high heat, humidity, or extremely low temperatures. Avoid leaving discs in cars; the interior of a car in direct sunlight can become extremely hot.

÷Always read and abide by the precautionary notes listed on disc labels.

Condensation

When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside the unit and impair its performance. In such cases, allow the unit to stand for about an hour or raise the room temperature gradually.

Cleaning and Handling Compact Discs

÷The presence of fingerprints or smudges on the surface of the disc will not directly affect the recorded signals, but, depending on the degree of contami- nation, the brightness of the light reflected from the signal surfaces may be reduced causing degradation of sound quality. Always keep your discs clean by wiping them gently with a soft cloth from the inner edge toward the outer edge.

÷If a disc becomes very dirty, dampen a soft cloth with water, (be sure to wring it out well) and wipe the away dirt gently. Remove any water drops with another soft, dry cloth.

÷Do not use record cleaning sprays or anti-static agents on discs. Never clean discs with benzene, thinner, or other volatile solvents or damage to the disc surface may result.

÷ With this player, use only those discs which display

'

the mark shown right (Optical audio digital discs).

÷When holding discs, do not touch their signal surfaces. Hold by the edges, or by one edge and the center hole.

÷Do not affix gummed labels or tape to the disc surface. Also, do not scratch or damage the label.

÷Discs rotate at high speeds inside the player. Do not use damaged, cracked or warped discs.

Do not play a CD with a special shape

Do not play a CD having other shape than a circular disc, such as heart shaped disc. Otherwise malfunction may occur.

FORCED DISC EJECTION

If the eject button does not function or the disc cannot be removed, pushing the pin provided into the forced ejection hole on the front panel will enable the disc to be removed.

When performing forced ejection, be sure to follow the precautions below.

1Be sure to turn OFF the power of the CD player, and check that the disc has stopped rotating. It takes about 60 seconds for the disc to stop rotating after the

power has been turned OFF.

If forced ejection is performed while the disc is rotating;

÷As the disc will be ejected outside the CD player rotating, it may hit your finger and cause injuries.

÷As the disc will be rotating with the clamp unstable, it may be scratched.

For the above reasons, never attempt to eject the disc forcibly while it is rotating.

2 Always use the pin provided (Do not use other objects). The provided pin is found in a groove in the bottom surface of the player.

When the provided forced eject pin is inserted fully into the forced eject hole on the front panel, the loaded disc is ejected about 5-10 mm from the loading slot, mak- ing it possible to remove it by hand.

Forced ejection hole

5

<DRB1333>

En

Page 4 Page 6
Page 5
Image 5
Pioneer CDJ-800 Storing Discs, Condensation, Cleaning and Handling Compact Discs, Do not play a CD with a special shape
Page 4 Page 6

CDJ-800 specifications

The Pioneer CDJ-800 is a professional digital media player that has become a staple in both club environments and home studios since its introduction. Renowned for its robustness and versatility, the CDJ-800 offers a range of features that cater to DJs of all skill levels, making it an essential tool in modern electronic music performance.

One of the most notable characteristics of the CDJ-800 is its ability to play various formats. It supports both CDs and digital audio files on USB drives, allowing DJs to transition seamlessly between traditional and digital media. The player facilitates compatibility with MP3, WAV, and AIFF formats, providing ample flexibility for music selection. This adaptability ensures that DJs can bring along their music library without the need for extensive setup.

The layout of the CDJ-800 is designed for ease of use and speed. A large, responsive jog wheel provides precise control over track manipulation, allowing for accurate scratching and pitch bending. Additionally, a clear display screen presents vital information such as track time, BPM, and waveform analysis. These features help DJs to visualize their performances and make real-time adjustments with ease.

Another key feature of the CDJ-800 is its advanced looping capabilities. DJs can create and manipulate loops on the fly, enhancing the creative potential during live sets. The player includes memory points for storing loop positions, which allows for quick access to specific parts of tracks without the need for extensive searching.

The CDJ-800 also incorporates Pioneer’s Anti-Shock technology, which protects against skipping during playback. With its anti-vibration design and built-in buffer memory, the player ensures a smooth audio output even in dynamic environments, such as clubs or festivals.

Networking capabilities are yet another highlight of the CDJ-800. It features the ability to link multiple units together, allowing DJs to control several players simultaneously. This network functionality not only streamlines performance but also encourages creative mixing possibilities.

In conclusion, the Pioneer CDJ-800 stands out for its combination of user-friendly features, adaptability to different media formats, and powerful performance capabilities. Its robust design, advanced looping functions, and networking options make it a formidable choice for anyone looking to take their DJ skills to the next level. As a marriage of technology and creativity, the CDJ-800 is a significant asset in the world of electronic music.
Top Page Image Contents