TAPE COPYING (from DECK I to DECK II)
4 | 2 |
½õÀö<?ùB ë |
|
+ | + |
– | – |
AUTO REVERSE | AUTO REVERSE |
Auto Tape Selector | Auto Tape Selector |
DECK @I | DECK @II |
| DOLBY |
1 | 1 |
ÖThe tape copying function permits you to copy the contents of a tape from DECK I to Deck II.
ÖThe SYNCHRO COPY button is used to select ei- ther normal speed copying, or
1.Load a tape for playback into DECK l and a tape for recording into Deck II.
2.Set the REV MODE switch.
3.Set the tape transport direction.
ÖTape copying is always performed in the direc- tion indicated by the tape transport indicator ( or ). To change this direction, press the desired playback button (3 or 2), then imme- diately press the stop (7) button.
4.Press the SYNCHRO COPY button to select either NORMAL or HIGH speed.
NORMAL : Tape copying at normal speed allows listen during playback (COPY indica- tor lights steadily).
HIGH : Tape copying at double speed (COPY indicator flashes). Playback will still audible.
To stop copying
Press the stop (7) button of either deck. Both decks will stop.
NOTES:
ÖThe tape in DECK lI will be copied in the same type of DOLBY NR (B/C) as DECK l’s tape, regard- less of its own setting. When listening to the cop- ied tape, set the DOLBY NR (B/C) to the type used for recording.
ÖIf a nearby television set is on while
ÖDuring
ÖDuring normal speed copying, the recording mute (¥) and pause (8)buttons of deck II also function.
ÖTape copying is cancelled when either of the two tapes reaches the end. Therefore it is advisable to use tapes of the same length.
ÖThe sound quality of the copied tape will be some- what less than the original. Therefore when making more than one copy, always record from the original tape (do not make a copy of a copy).
ÖThe recording level adjustment is not necessary dur- ing tape copying.
15