Section
02
Operating this unit
4TP indicator
Shows when a TP station is tuned in.
5TA indicator
Shows when TA (traffic announcement standby) function is on.
6RPT indicator
Shows when repeat play is turned on.
7LOUD indicator
Appears in the display when loudness is turned on.
8Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
9LOC indicator
Shows when local seek tuning is on.
Basic Operations
this unit’s source is turned on. To retract the antenna, turn the source off.
Adjusting the volume
%Use VOLUME to adjust the sound level.
Turning the unit off
%Press SOURCE and hold until the unit turns off.
Tuner
Listening to the radio
1Press SOURCE to select the tuner.
2Press BAND to select a band.
Press BAND until the desired band (F1, F2 for FM or MW/LW) is displayed.
Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the
%Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources:
Notes
!In the following cases, the sound source will not change:
—When there is no disc in the unit.
—When AUX (auxiliary input) is set to off (refer to page 11).
!AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxili- ary setting on page 11).
!When this unit’s blue/white lead is connected to the vehicle’s
3To perform manual tuning, briefly press c or d.
4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.
6 | En |
