Pioneer DEH-22UB owner manual Audio Adjustments, Operating this unit, Function settings, English

Operating this unit

Pausing playback	Audio Adjustments
1 Press 2/PAUSE to pause or resume.	1	Press M.C. to display the main menu.
Enhancing compressed audio and restoring rich
sound (sound retriever)	2	Turn M.C. to change the menu option
1 Press 1/S.Rtrv to cycle between:	and press to select AUDIO.
OFF (off)—1—2
1 is effective for low compression rates, and 2 is	3	Turn M.C. to select the audio function.
effective for high compression rates.	After selecting, perform the following proce-
	dures to set the audio function.

Section

01

English

Function settings

1Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select FUNCTION.

3Turn M.C. to select the function.

After selecting, perform the following proce- dures to set the function.

REPEAT (repeat play)

1Press M.C. to display the setting mode.

2Turn M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on the previous page.

3Press M.C. to confirm the selection.

RANDOM (random play)

1Press M.C. to turn random play on or off.

PAUSE (pause)

1Press M.C. to pause or resume.

S.RTRV (sound retriever)

Automatically enhances compressed audio and re- stores rich sound.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on this page.

3Press M.C. to confirm the selection.

Note

Operation is complete even if the menu is can- celled before being confirmed.

FAD/BAL (fader/balance adjustment)

You can change the fader/balance setting.

1Press M.C. to display the setting mode.

2Press M.C. to cycle between fader and balance.

3Turn M.C. to adjust speaker balance. Adjustment range (front/rear): F15 to R15 Adjustment range (left/right): L15 to R15

FR 0 is the proper setting when only two speakers are used.

EQUALIZER (equalizer recall)

There are six stored settings DYNAMIC (dynamic), VOCAL (vocal), NATURAL (natural), CUSTOM (cus- tom), FLAT (flat) and POWERFUL (powerful).

!When FLAT is selected no adjustments are made to the sound.

1Press M.C. to display the setting mode.

2Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM— FLAT—POWERFUL

3Press M.C. to confirm the selection.

TONE CTRL (equalizer adjustment)

You can adjust the bass/mid/treble level.

!Adjusted equalizer curve settings are stored in

CUSTOM.

1Press M.C. to display the setting mode.

2Press M.C. to select BASS (bass)/MID (mid)/TRE- BLE (treble).

3Turn M.C. to adjust the level. Adjustment range: +6 to -6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low- and high-frequency ranges at low volume.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting. OFF (off)—LOW(low)—HIGH (high)

3Press M.C. to confirm the selection.

En 9