Pioneer DEH-24UB, DEH-34UB manual 4

Section

02Operating this unit

Operating this unit

If you select NO, you cannot set up in the set up

! To avoid damaging the device or vehicle inte-

	Part	Operation
		Press to recall preset stations.
h	a/b	Press to select the next/pre-
		vious folder.
i	AUDIO	Press to select an audio func-
		tion.
		Press to select different dis-
j	DISP/SCRL	plays.
		Press and hold to turn dimmer
		on or off.
k	e	Press to pause or resume play-
		back.
l	FUNC-	Press to select functions.
	TION
		Press to display the disc title,
		track title, folder, or file list de-
	LIST/	pending on the source.
m		Press to display the list de-
	ENTER	pending on the source.
		While in the operating menu,
		press to control functions.

Indicator State

!Tuner: band and frequency

	Main dis-	! Built-in CD, USB storage
1	play sec-	device and iPod: elapsed
	tion	playback time and text in-
		formation
2	(list)	The list function is being oper-
		ated.
3	LOC	Local seek tuning is on.
4	(re-	Track or folder repeat is on.
	peat)
	(ran-	Random play is on.
		The iPod source is selected
5	dom/shuf-
		and the shuffle or shuffle all
	fle)
		function is on.
6	(sound re-	The sound retriever function is
		on.
	triever)
7	(iPod	This unit’s iPod function is op-
	control)	erated from your iPod.

menu.

3Perform the following procedures to set the menu.

To proceed to the next menu option, you need to confirm your selection.

CLOCK SET (setting the clock)

1Turn M.C. to adjust hour.

2Press M.C. to select minute.

3Turn M.C. to adjust minute.

4Press M.C. to confirm the selection.

DEMO (demo display setting)

1Turn M.C. to set the demo display to on or off.

2Press M.C. to confirm the selection. QUIT appears.

4To finish your settings, turn M.C. to select YES. Press to select.

# If you prefer to change your setting again, turn M.C. to switch to NO. Press to select.

Notes

rior, remove any cables and devices attached

to the front panel before detaching it.

Removing the front panel to protect your unit from theft

1Press the detach button to release the front panel.

2Push the front panel upward (M) and then pull it toward (N) you.

3Always keep the detached front panel in a pro- tection device such as a protection case.

Re-attaching the front panel

1Slide the front panel to the left.

Make sure to insert the tabs on the left side of the head unit into the slots on the front panel.

Display indication					Set up menu
		1			When you turn the ignition switch to ON after in-
					stallation, set up menu appears on the display.
					You can set up the menu options below.
					1 After installation of this unit, turn the
					ignition switch to ON.
	3		5 6	7
					SET UP appears.
2		4

2 Turn M.C. to switch to YES. Press M.C. to select.

# If you do not operate for 30 seconds, the set up menu will not be displayed.

# If you prefer not to set up at this time, turn M.C. to switch to NO. Press to select.

4 En

!You can set up the menu options in the initial settings. For details about the settings, refer to Initial settings on page 9.

!You can cancel set up menu by pressing SRC/OFF.

Basic operations

Important

!Handle gently when removing or attaching the front panel.

!Avoid subjecting the front panel to excessive shock.

!Keep the front panel out of direct sunlight and high temperatures.

2Press the right side of the front panel until it is firmly seated.

If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit cor- rectly. Forcing the front panel into place may result in damage to the front panel or head unit.

Turning the unit on

1Press SRC/OFF to turn the unit on.

Turning the unit off

1Press and hold SRC/OFF until the unit turns off.