!CUSTOMis an adjusted equalizer cur ve
thatyou create.
!WhenEQ FLAT is selected no supplement
orcorrection is made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternativelybetween
EQFLAT and a set equalizer curve.
%PressEQ to select the equalizer.
PressEQ repeatedly to switch between the fol-
lowingequalizers:
SPR-BASSPOWERFULNATURAL
VOCALCUSTOMEQFLAT

Adjusting equalizer curves

Youcan adjust the currently selected equalizer
curvesetting as desired.Adjusted equalizer
curvesettings are memorized inCUSTOM.
!Ifyou make adjustments when a cur ve
otherthan CUSTOM is selected, the newly
adjustedcurve will replace the previous
curve.Then a new cur ve with CUSTOM ap-
pearson the display while selecting the
equalizercurve.
1 PressAUDIO to select EQ.
2 Presscor dto select the equalizer
bandto adjust.
EQ-L(low)EQ-M (mid)EQ-H (high)
3 Pressaor bto adjust the level of the
equalizerband.
+66is displayed as the level is increased
ordecreased.
#Youcan then select another band and adjust
thelevel.

Fine-adjusting equalizer curve

Youcan adjust the center frequency and the Q
factor(curve characteristics) ofeach currently
selectedcurve band (EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
Q=2N Q=2W
Frequency (Hz)
!Ifyou make adjustments when a cur ve
otherthan CUSTOM is selected, the newly
adjustedcurve will replace the previous
curve.Then a new cur ve with CUSTOM ap-
pearson the display while selecting the
equalizercurve.
1 PressAUDIO and hold until frequency
andthe Q factor (e.g., F- 80 Q 1W) appears
inthe display.
2 PressAUDIO to select the desired band
foradjustment.
LowMidHigh
3 Presscor dto select the desired fre-
quency.
Low:4080100160 (Hz)
Mid:2005001k2k (Hz)
High:3k8k10k12k (Hz)
4 Pressaor bto select the desired Q fac-
tor.
2N1N1W2W
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressAUDIO to select LOUD.
Audio Adjustments
En 19
English
Section
07