Sharp ER-A450 instruction manual Before calling for service, Error code table

10Before calling for service

The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional faults of the machine. It is therefore advisable to refer to the “Checking” shown in the right-hand column before calling for service.

		Fault	Checking
(1)	The display won't be illuminated even when		• Is power supplied to the electrical outlet?
	the mode switch is turned to any other		• Is the power cord plug out or loosely connected to the
	position than “	”.	electrical outlet?
(2)	The display is illuminated, but the whole machine		• Is a cashier code assigned to the register?
	refuses registrations.		• Is a clerk code assigned to the register?
			• Is the mode switch set properly at the “REG” position?
(3)	No receipt is issued.		• Is the receipt paper roll properly installed?
			• Is there a paper jam?
			• Is the receipt function in the “OFF” status?
			• Is the print head release lever at the printing position?
(4)	No journal paper is taken up.		• Is the take-up spool installed on the bearing properly?
			• Is there a paper jam?
(5)	Printing is unusual.		• Is the print head release lever at the printing position?
			• Is the paper roll properly installed?

Error code table

When the following error codes are displayed, press the ckey and take a proper action according to the table below.

Error	Error status	Action
code
E01	Registration error	Make a correct key entry.
E02	Misoperation error	Make a correct key entry.
E03	Undefined code is entered.	Enter a correct code, or declare it by the programming.
E04	Journal paper is nearly empty.	Replace a journal paper roll with a new one.
E05	Secret code error	Enter a correct secret code.
E07	Memory is full.	Expand the file within a capacity of memory.
E11	Compulsory depression of the :key for direct	Press the : key and continue the operation.
	finalization
E12	Compulsory tendering	Make a tendering operation.
E22	Overlapped cashier error
E23	Cashier resetting over error
E31	Compulsory non-add code entry	Enter a non-add code.
E32	No entry of your cashier code	Make a cashier code entry.
E33	The current cashier code should not be changed.	Change a cashier after finalizing the transaction.
E34	Overflow limitation error	Make a registration within a limit of entry.
E35	The open price entry is inhibited.	Make a preset price entry.
E36	The preset price entry is inhibited.	Make an open price entry.
E37	The direct finalization is inhibited.	Make a tendering operation.
E58	Undefined clerk code is entered.	Enter a correct clerk code.
E67	Registration buffer is full.
E76	The drawer is still opened.	Close the drawer.

123