Sharp ER-A450 instruction manual Removing a paper jam, Pull all the

7.Remove the outer side of the take-up spool as shown on the left.

8.Remove the printed journal roll from the take-up spool.

Removing a paper jam

Precaution: Be very careful with the manual cutter, so as not to cut yourself. Never touch the print head immediately after printing, because the head may still be hot.

Pull all the

way forward

1.Remove the printer cover.

2.Pull the print head release lever all the way forward (after it stops at one position, continue pulling forward until it stops again and cannot be pulled forward any further).

3.Remove the paper jam. Check for and remove any shreds of paper that may remain in the printer.

4.Reset the paper roll correctly by following the steps in “Installing the paper roll”.

5.Return the print head release lever to its original position.

6.Replace the printer cover.

119