Sharp ER-A450 instruction manual Error warning, Cashier assignment, Clerk assignment, Procedure

Procedure

Cashier assignment
■ Sign-on					■ Sign-off
To display the signed-on cashier code					Variant 1 / Variant 2 :
Variant 1 :				Ü	Ü	Ü
(Code is displayed)		Cashier code
Variant 2 :	Ü				Ü
(Code is not displayed)			Cashier code

Note

The real cashier key system is also available. In this system put one of the 1 through 15 keys in the cashier switch to sign on. If you want to choose this system, consult your dealer.

Clerk assignment
■ Sign-on					■ Sign-off
To display the signed-on clerk code					Variant 1 / Variant 2 :
Variant 1 :				^	^	^
(Code is displayed)		Clerk code
Variant 2 :	^				^
(Code is not displayed)			Clerk code

Note

•On the current factory setting, only the entry of the cashier code is required. When cashier & clerk codes entries are desirable for your register, consult your dealer.

•If you want to enter cashier and/or clerk codes before every transaction, consult your dealer.

•For the display type selection of cashier code and clerk code, “Variant 1” has been preset. For the selection of “Variant 2,” consult your dealer.

•Clerk can be changed during the transaction. Consult your dealer.

2Error warning

In the following examples, your register will go into an error state accompanied with a warning beep and the

error symbol ” on the display. Clear the error state by pressing theckey and take proper action. Please refer to the error code table on page 123.

•When you enter an over 32-digit number (entry limit overflow): Cancel the entry and re-enter a correct number.

•When you make an error in key operation: Clear the error and continue operation.

•When you make an entry beyond a programmed amount entry limit: Check to see if the entered amount is correct. If it is correct, it can be rung up in the MGR mode. Contact your manager.

•When an including-tax subtotal exceeds eight digits: Delete the subtotal by pressing the ckey and press the ;, •, ( through +, or ]through Õkey to finalize the transaction.

94