Sharp ER-A450 Manual tax 1-6 system Manual entry method using preset percentages, Procedure

Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)

Procedure

To use a programmed rate

: VAT rate ×

This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1 preset percentages when the ×key is pressed just after the :key. For this system, the keyed-in tax rate can be used.

Manual tax 1-6 system (Manual entry method using preset percentages)

Procedure

:×

This system provides the tax calculation for taxable 1 through 6 subtotals. This calculation is performed using the corresponding programmed percentages when the ×key is pressed just after the :key.

After this calculation, you must finalize the transaction.

Automatic VAT 1-3 and automatic tax 4-6 system

This system enables the calculation in the combination with automatic VAT 1 through 3 and automatic tax 4 through 6. The combination can be any of VAT1 through VAT3 corresponding to taxable 1 through taxable 3 and any of tax 4 through 6 corresponding to taxable 4 through taxable 6 for each item. The tax amount is calculated automatically with the percentages previously programmed for these taxes.

Note

•A PLU not programmed for any of the tax statuses is registered depending on the tax status of the department which the PLU belongs to.

•VAT/tax assignment is printed at the fixed right position near the amount on the receipt as follows:

VAT1/tax1 A

VAT2/tax2 B

VAT3/tax3 C

VAT4/tax4 D

VAT5/tax5 E

VAT6/tax6 F

When the multiple VAT/tax is assigned to a department or a PLU, a smaller number of the VAT/tax will be printed. For details, contact your authorized SHARP dealer.

Example	Key operation
	(When the manual	550 4
	VAT 1-6 system	:
	is selected)	×

;

Print

103