Sharp ER-A450 Setting the time range for hourly reports PGM 2, RS-232C channel assignment PGM 2

Setting the time range for hourly reports PGM 2 2619

You can set the time range for an hourly report.

Procedure

When A through C are all zeros

2619 . Å * ABC ;

*A: Time range

To set the time range to 30 minutes (in the 24-hour system), enter 0. To set the time range to 60 minutes (in the 24-hour system), enter 1.

BC: Starting time (hour = 00 to 23)
Example	Key operation	Print

2619 . Å

107 ;

Note

To perform this setting, an hourly Z report (# 160) must be done.

RS-232C channel assignment PGM 2 2690

Your machine is equipped with an RS-232C interface. If you use the on-line communication function, the channel number of the RS-232C interface must be programmed by using the following procedure.

To realize the on-line communication, consult your dealer.

Procedure

						When A through D are all zeroes
		.	Å			Å			:	;
2690					*P			**ABCD
				1 to 3
*P: 1
** Item:							Selection:				Entry:
	A	For the ON-LINE communication					Disable				0
							Enable (enter the channel number)				8
	B to D Always enter 0.										0

*P: 2 and 3 (ABCD: Not used. Always enter 0.)

Example Key operation

2690 . Å

1 Å :

;

Print

P

A through D

62