Section
02 
Operating this unit
Using Bluetooth wireless | 1 Press M.C. to start searching. | ||
technology |
| ||
| ! To cancel, press M.C. while searching. | ||
Connection menu operation | 2 Turn M.C. to select a device from the device list. | ||
! If the desired device is not displayed, select | |||
Important |
| ||
| ! | ||
! Be sure to park your vehicle in a safe place | unit. Once the connection is established, this | ||
and apply the parking brake when performing | number disappears. | ||
this operation. |
| ! Press and hold M.C. to switch the Bluetooth | |
| device address and device name. | ||
! Connected devices may not operate properly if | |||
3 Press M.C. to connect the selected device. | |||
more than one is connected at a time. Con- | |||
! To complete the connection, check the device | |||
necting one device at a time is recommended. | name | ||
1 Press and hold | to display the con- | on your device. | |
! PIN code is set to 0000 as the default. You | |||
nection menu. |
| can change this code. | |
# You cannot operate this step during a call. | ! If you are unable to complete the connection | ||
2 Turn M.C. to select the function. | using this unit, use the device to connect to | ||
the unit. | |||
After selecting, perform the following proce- | ! If 3 devices are already paired, DEVICEFULL is | ||
dures to set the function. | displayed and it is not possible to perform this | ||
! When the control mode is set to CTRL iPod/ | operation. In this case, delete a paired device | ||
first. | |||
|
| ||
CTRL APP, only PAUSE or S.RTRV is avail-
able.
DEVICELIST (connecting or disconnecting a device from the device list)
!When no device is selected in the device list, this function is not available.
1Press M.C. to display the setting mode.
2Turn M.C. to select the name of a device you want to connect/disconnect.
!Press and hold M.C. to switch the Bluetooth device address and device name.
3Press M.C. to connect/disconnect the selected de-
vice.
If the connection is established, * is indicated on the device name.
DEL DEVICE (deleting a device from the device list)
!When no device is selected in the device list, this
function is not available.
1Press M.C. to display the setting mode.
2Turn M.C. to select the name of a device you want to delete.
!Press and hold M.C. to switch the Bluetooth device address and device name.
3Press M.C. to display DELETE YES.
4Press M.C. to delete a device information from the device list.
!While this function is in use, do not turn off the engine.
ADD DEVICE (connecting a new device)
14
En
SPCLDEVICE (setting a special device)
Bluetooth devices that are difficult to establish a connection with are called special devices. If your Bluetooth device is listed as a special device, select the appropriate one.
1Press M.C. to display the setting mode.
!If 3 devices are already paired, DEVICEFULL is displayed and it is not possible to perform this operation. In this case, delete a paired device first.
2Turn M.C. to display a special device. Press to se- lect.
3Turn M.C. to display this unit’s device name, Bluetooth device address and PIN code.
4Use a device to connect to this unit.
!To complete the connection, check the device name
!PIN code is set to 0000 as the default. You can change this code.
A. CONN (connecting to a Bluetooth device automati- cally)
1Press M.C. to turn automatic connection on or off.
VISIBLE (setting the visibility of this unit)