Introduction of audio

adjustments

4
3
1
5
6
2
1SFEQ indicator
Appears in the display when SFEQ function
can be activated.
2Loudness indicator
Appears in the display when loudness is
turned on.
3SW indicator
Shows when the subwoofer output is turned
on.
4Audio display
Shows the audio adjustments status.
5EQ-EX indicator
Appears in the display when EQ-EX function
can be activated.
6CUSTOM indicator
Shows when custom equalizer curve is pre-
sently selected.
%Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)EQ-L (equalizer
curve adjustment)B(bass and treble level
adjustment)LOUD (loudness)SUB, W
(subwoofer on/off setting)/NOFAD (non fading
output on/off setting)80: 0 (subwoofer set-
ting)/NOFAD (non fading output setting)
HPF (high pass filter)SLA (source level ad-
justment)
#If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
B.
#When the subwoofer controller setting is only
P/O :FUL, you cannot switch to SUB, W. (Refer to
page 34.)
#You can select the 80: 0 only when subwoofer
output is turned on in the SUB, W.
#When the subwoofer controller setting is only
P/O :FUL, you can switch to the non fading out-
put on/off setting. (Refer to page 34.)
#You can select the non fading output setting
only when non fading output is turned on in the
non fading output on/off setting.
#When selecting the FM tuner as the source,
you cannot switch to SLA.
#To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Compensating for

equalizer curves (EQ-EX)

The EQ-EX compensates for each equalizer
curve. Furthermore, you can adjust bass and
treble for each source when CUSTOM curve is
selected.
!If SFEQ has been previously selected, press
EQ-EX and hold to switch to EQ-EX and
EQ-EX appears in the display.
%Press EQ-EX to turn EQ-EX on.
EQ-EX:ON appears in the display. EQ-EX is
now on.
#To turn EQ-EX off, press EQ-EX.
Audio Adjustments
En
26
Section
07
HHHHHHHHHHHHHH