Introduction of audioadjustments
4
3
1
5
6
2
1SFEQindicator
Appearsin the display when SFEQ function
canbe activated.
2Loudnessindicator
Appearsin the display when loudness is
turnedon.
3SWindicator
Showswhen the subwoofer output is turned
on.
4Audiodisplay
Showsthe audio adjustments status.
5EQ-EXindicator
Appearsin the display when EQ-EX function
canbe activated.
6CUSTOMindicator
Showswhen custom equalizer cur ve is cur-
rentlyselected.
%PressAUDIO to display the audio func-
tionnames.
PressAUDIO repeatedly to switch between
thefollowing audio functions:
FAD(balance adjustment)EQ-L (equalizer
curveadjustment)B(bass and treble level
adjustment)LOUD(loudness)SUB, W
(subwooferon/off setting)/NOFAD (non fading
outputon/off setting)80: 0 (subwoofer set-
ting)/NOFAD(non fading output setting)
HPF(high pass filter)SLA (source level ad-
justment)
#IfEQ-EX function has been selected and only
whenEQ-EX is turned on and CUSTOM is se-
lectedas the equalizer curve, you can switch to
B.
#Whenthe subwoofer controller setting is only
P/O:FUL, you cannot switch to SUB, W. (Refer to
page34.)
#Youcan select the 80: 0 only when subwoofer
outputis turned on in the SUB, W.
#Whenthe subwoofer controller setting is only
P/O:FUL, you can switch to the non fading out-
puton/off setting. (Refer to page 34.)
#Youcan select the non fading output setting
onlywhen non fading output is turned on in the
nonfading output on/off setting.
#Whenselecting the FM tuner as the source,
youcannot switch to SLA.
#Toreturn to the display of each source, press
BAND.
Note
Ifyou do not operate the audio function within
about30 seconds, the display is automatically re-
turnedto the source display.
Compensating forequalizer curves (EQ-EX)
TheEQ-EX compensates for each equalizer
curve.Furthermore, you can adjust bass and
treblefor each source when CUSTOM cur ve is
selected.
!IfSFEQ has been previously selected, press
EQ-EXand hold to switch to EQ-EX and
EQ-EXappears in the display.
%PressEQ-EX to turn EQ-EX on.
EQ-EX:ONappears in the display. EQ-EX is
nowon.
#Toturn EQ-EX off, press EQ-EX.
Audio Adjustments
En
26
Section
07