Listening to SIRIUS Satellite

Radio

5
5
5
2
2
2
2
1
1
1
1
3
3
3
3
4
4
4
4
This unit can control a SIRIUS Satellite Radio
tuner (sold separately).
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
!With this unit, you can operate one addi-
tional function: SIRIUS channel direct se-
lection. Refer to Selecting a SIRIUS channel
directly on this page.
1SIRIUS band indicator
Shows the SIRIUS band which has been
selected.
2SIRIUS preset number indicator
Shows what SIRIUS preset has been
selected.
3SIRIUS channel select setting indicator
Shows what channel select setting has
been selected. CH is displayed when
Channel number is selected, and CAT is
displayed when Category is selected.
4SIRIUS channel number indicator
Shows to which SIRIUS channel number
the tuner is tuned.
5SIRIUS channel name
Shows the channel name of broadcast
channel.
1 Press SOURCE to select SIRIUS.
Press SOURCE until you see SIRIUS displayed.
2 Press BAND to select a SIRIUS band.
Press BAND repeatedly until the desired SIR-
IUS band is displayed, SR-1,SR-2 or SR-3.
3 To perform tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
#If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
#You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on page 47.)
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.

Selecting a SIRIUS channel

directly

You can select a SIRIUS channel directly by
entering the desired channel number.
1 Press DIRECT on the remote control.
CHANNEL INPUT appears in the display.
2 Use 09 on the remote control to input
the desired channel number.
#To cancel the input numbers, press CLEAR on
the remote control.
3 While the input number is displayed,
press DIRECT on the remote control.
The entered SIRIUS channel is selected.
SIRIUS Satellite Radio tuner
En 45
English
Section
10