Section

 

02

Using this unit

Using this unit

For iPhone users

Switching the display

!This function is compatible with iPhone and

!

iPod touch.

Selecting the desired text information

The device has iOS 5.0 or higher.

1 Press DISP to cycle between the following:

Notes

!

TRACK INFO (track title/artist name/album

 

title)

!

Please check our website for a list of sup-

 

!

APP NAME (application name)

 

ported iPhone applications for this unit.

 

!

ELAPSED TIME (playback time)

!

Pioneer is not liable for any issues that may

!

CLOCK (source name and clock)

 

arise from incorrect or flawed app-based

 

!

SPEANA (spectrum analyzer)

 

content.

 

 

 

!The content and functionality of the sup-

ported applications are the responsibility of

Function settings

the App providers.

1 Press M.C. to display the main menu.

 

!FADER is not available when SUB.W/SUB.W is selected in SP-P/O MODE. For details, refer to SP-P/O MODE (rear output and preout set- ting) on page 12.

!SUB.W and SUB.W CTRL are not available when REAR/REAR is selected in SP-P/O MODE. For details, refer to SP-P/O MODE (rear output and preout set- ting) on page 12.

!SUB.W CTRL is not available when SUB.W is selected in OFF. For details, refer to SUB.W (subwoofer on/off setting) on page 10.

!SLA is not available when FM is selected as the source.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

POWERFUL—NATURAL—VOCAL—CUS-

TOM1—CUSTOM2—FLAT—SUPER BASS

The equalizer band and equalizer level can be

customized when CUSTOM1 or CUSTOM2 is

selected.

If selecting CUSTOM1 or CUSTOM2, complete

the procedures outlined below. If selecting

other options, press M.C. to return to the pre-

vious display.

! CUSTOM1 can be set separately for each

source. However, USB, iPod, PANDORA

and APP are all set to the same setting au-

Starting procedure for iPhone users

1Connect an iPhone to USB input.

2Switch the source to APP.

3Start up the application on the iPhone and initiate playback.

Basic operations

Selecting a track

1Press c or d.

Fast forwarding or reversing

1Press and hold c or d.

Pausing playback

1Press BAND/ to pause or resume.

2Turn M.C. to change the menu option and press to select FUNCTION.

3Turn M.C. to select the function.

Once selected, the following functions can be adjusted.

PAUSE (pause)

1Press M.C. to pause or resume.

S.RTRV (sound retriever)

1Press M.C. to select the desired setting.

1—2—OFF (off)

1 is effective for low compression rates, and 2 is effective for high compression rates.

FADER (fader adjustment)

1Press M.C. to display the setting mode.

2Turn M.C. to adjust the front/rear speaker bal- ance.

BALANCE (balance adjustment)

1Press M.C. to display the setting mode.

2Turn M.C. to adjust the left/right speaker bal- ance.

EQ SETTING (equalizer recall)

 

tomatically.

 

! CUSTOM2 is a shared setting used in com-

 

mon for all sources.

3

Press M.C. to display the setting mode.

4

Press M.C. to cycle between the following:

 

Equalizer band—Equalizer level

5

Turn M.C. to select the desired setting.

 

Equalizer band: 80HZ—250HZ—800HZ—

 

2.5KHZ—8KHZ

 

Equalizer level: +6 to –6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low- frequency and high-frequency ranges at low vol- ume.

1Press M.C. to select the desired setting.

OFF (off)—LOW (low)—MID (mid)—HI (high)

SUB.W (subwoofer on/off setting)

Audio adjustments

1Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select AUDIO.

3Turn M.C. to select the audio function. Once selected, the following audio functions can be adjusted.

This unit is equipped with a subwoofer output which can be turned on or off.

1Press M.C. to select the desired setting. NOR (normal phase)—REV (reverse phase)— OFF (subwoofer off)

SUB.W CTRL (subwoofer adjustment)

10 En