Section

02Using this unit

Using this unit

2Turn M.C. to display ILLUMI and press to select.

3Turn M.C. to display KEY COLOR or DISP COLOR. Press to select.

4Press M.C. and hold until the customizing illumination color setting appears in the dis- play.

5Press M.C. to select the primary color.

R(red)—G (green)—B (blue)

6Turn M.C. to adjust the brightness level. Adjustment range: 0 to 60

# You cannot select a level below 20 for all three of

R (red), G (green), and B (blue) at the same time.

# You can also perform the same operation on other colors.

Note

You cannot create a custom illumination color while SCAN is selected.

About MIXTRAX

MIXTRAX technology is used to insert a variety of sound effects in between songs, allowing you to experience your music as a nonstop mix complete with visual effects.

Notes

!Depending on the file/song, sound effects may not be available.

!Turn MIXTRAX off if the visual effects it pro- duces have adverse effects on driving. Refer to Operations using the MIXTRAX button on page 6.

MIXTRAX menu

1 Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select MIXTRAX.

3Turn M.C. to select the MIXTRAX func- tion.

Once selected, the following MIXTRAX functions can be adjusted. The function is enabled when MIXTRAX is on.

!FLASH AREA and FLASH PATTERN are not available for DEH-X2600UI and DEH-X26UI.

!MIX PATTERN is not available for DEH- X3600UI and DEH-X36UI.

SHORT PLAYBCK/SHORT MODE (short playback mode)

You can select the length of the playback time.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

1.0MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

FLASH AREA (flash area)

You can select areas for flashing colors.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting. KEY/DISPLAY (key and display)—KEY (key)—

OFF (off)

!When OFF is selected, the color set under IL- LUMI is used as the display color.

FLASH PATTERN (flash pattern)

The flashing color and MIXTRAX special effects display change with changes in the sound and bass levels.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

!SOUND LEVEL 1 to SOUND LEVEL 6 – The flash pattern changes according to the sound level. Select a desired mode.

!LOW PASS 1 to LOW PASS 6 – The flash pattern changes according to the bass level. Select a desired mode.

!RANDOM 1 – The flash pattern changes randomly according to the sound level mode and low pass mode.

!RANDOM 2 – The flash pattern changes randomly according to the sound level mode.

!RANDOM 3 – The flash pattern changes randomly according to the low pass mode.

MIX PATTERN (mix pattern)

The MIXTRAX special effects display changes with changes in the audio level.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

!SOUND LEVEL – The mix pattern changes according to the sound level.

!LOW PASS – The mix pattern changes ac- cording to the bass level.

!RANDOM – The mix pattern changes ran- domly according to the sound level mode and low pass mode.

DISPLAY FX/DISP FX (display effect)

The MIXTRAX special effects display can be turned on or off.

1Press M.C. to select the desired setting. ON (MIXTRAX special effects display)—OFF (normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects while manually changing tracks.

1Press M.C. to select the desired setting. ON (on)—OFF (off)

Initial menu

1Press and hold SRC/OFF until the unit turns off.

2Press M.C. to display the main menu.

3Turn M.C. to change the menu option and press to select INITIAL.

Once selected, the initial menu function below can be adjusted.

SP-P/O MODE (rear output and preout setting)

The rear speaker leads output and the RCA output of this unit can be used to connect a full-range speaker or subwoofer. Select a suitable option for your connection.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

!REAR/SUB.W – Select when there is a full- range speaker connected to the rear speak- er leads output and there is a subwoofer connected to the RCA output.

!SUB.W/SUB.W – Select when there is a subwoofer connected directly to the rear speaker leads output without any auxiliary amp and there is a subwoofer connected to the RCA output.

!REAR/REAR – Select when there is a full- range speaker connected to the rear speak- er leads output and the RCA output.

If there is a full-range speaker connected to the rear speaker leads output and the RCA output is not used, you may select either REAR/SUB.W or REAR/REAR.

12En